APPROVED FOR USE IN TIER I (COASTAL) COUNTIES IN TEXAS
Using Fast Felt® products allows the homeowner to purchase insurance from the following organization:
Each of the following Fast Felt® products are approved for use in any of the 14 First Tier Counties along the Texas Gulf Coast ...
... (and including parts of Harris County):
• Fast Felt® for Florida Product, an ASTM D226, Type II (30#) felt
with 288 nail reinforcement Tabs
This roll can only be unrolled from left to right on the roof deck
due to the regulated nail pattern required.
The row of nail reinforcement Tabs, on the downward slope of the roll,
are in an edge row and are 6-inches on-center.
• Fast Felt® Tabs on an ASTM D226, Type II (30#) felt with our Texas Tab pattern
3 rows of Tabs, 12-inches on center:
2 edge rows and 1 row of Tabs down the center of the width of the roll
(This roll can be unrolled from either end of the wood roof deck:
(a) left-to-right or (b) right-to-left .)
•Fast Felt® Tabs on an ASTM D4869 felt with our Texas Tab pattern
Texas Windstorm Inspectors are knowledgeable about our Fast Felt® product.
Please review the following:
Texas Department of Insurance Memo - View PDF